CU Amiga Super CD-ROM 21

home *** CD-ROM | disk | FTP | other *** search

/ CU Amiga Super CD-ROM 21 / CU Amiga Magazine's Super CD-ROM 21 (1998)(EMAP Images)(GB)[!][issue 1998-04].iso / CUCD / Programming / RTGMaster / devdocs / rtgmaster.ad < prev next >

Wrap

Text File | 1998-01-13 | 82KB | 2,063 lines

rtgmaster.library/CallRtgC2P rtgmaster.library/CallRtgC2P NAME CallRtgC2P -- Perform c2p for Planar Screens, CopyRtgPixelArray for Chunky Screens SYNOPSIS int CallRtgC2P(RtgScreen,BufAdr,Array,signal,xpos,ypos,width,height,mode) D0 A0 A1 A2 D0 D1 D2 D3 D4 D5 int CallRtgC2P(struct RtgScreen *,APTR,APTR,ULONG,ULONG,ULONG,ULONG,ULONG,ULONG) FUNCTION This function will look what the "standard c2p" for the system is up to now (the standard c2p can be choose by a future version of the Rtgmaster Screenmode requester, the available c2p algorithms are found in libs:rtgc2p, how own c2p algorithms can be added to the system will be explained in the documentation of the first version of rtgmaster.library that actually supports CallRtgC2P). The function will, if the display is a Planar one, convert the Chunky Data in Array to Planar using the choosen c2p algorithm, and display it in the choosen Buffer. For Chunky Displays it will instead do the same as CopyRtgChunkyPixel. This way a very easy possibility to support both AGA and Graphics Boards without having to do "special versions" will be available, if one uses a Fastram Buffer. I am still looking for c2p algorithms for this function !!! All used c2p algorithms should support AGA and additional, it would be fine, if they supported 1x1,1x2,2x1 and 2x2. If you have fine c2p algorithms, mail me (MagicSN@birdland.es.bawue.de). NOTE : The Array should EXACTLY be as big as specified with Left, Top, Width and Height... it should *NOT* be bigger. NOTE: Currently you *HAVE TO* use xpos=0 ypos=0 width=<max x> height=<max y> Maybe this will change in the future !!!!!!!!!!!!!! This is only because i do not have ANY c2p that supports that feature up to now... NOTE: Some c2p algorithms might do NOTHING in certain colour depths, chunky modes or for interleaved bitmaps. Be careful about this. If the c2p works, this function returns 0, otherwise an errorcode. Principially it COULD support 256, 64 (EHB), 32 or 16 colors and 1x1, 1x2, 2x1, 2x2,4x2,2x4 and 4x4 (look at the includes). It is also possible to choose the FASTEST AVAILABLE, the BEST AVAILABLE mode or the mode that was selected from the user as standard mode for his system, using the Screenmode Requester. If the user did not specify a standard c2p, this function will use the fastest available mode. The signal indicates (for asynchrone c2p) that the c2p has done. For synchrone ones it is set after quitting the function. In mode you specify which c2p mode to use. For Graphics Boards, ALWAYS 1x1 is used. IMPLEMENTED WITH SUBLIBRARIES WITH AT LEAST VERSION 2.0 (none up to now...) INPUTS RtgScreen - The RtgScreen to use. BufAdr - The address of the buffer to use Array - The fastram buffer Left - The x position on the Bitmap of RtgScreen where to put the stuff Top - The y position Width - The Width of the stuff Height - The Height of the stuff SEE ALSO CopyRtgPixelArray() rtgmaster.library/CloseClient rtgmaster.library/CloseClient NAME CloseClient -- Closes the Client of a TCP/IP connection again SYNOPSIS CloseClient(SBase,Socket) A0 A1 CloseClient(struct Library *,struct TCP_Socket *) FUNCTION Terminates a "virtual connection" of TCP/IP and gives the Socket of the Client back to the system. (For UDP it only gives the socket back to the system, as there are no "virtual connections" in connectionless UDP). NOTE: It might appear strange to you, that you have to open bsdsocket.library yourselves and provide it as parameter. This is needed because of some internal problems of AmiTCP, that make it IMPOSSIBLE opening it inside a library. Look at the Docs for more information. You do NOT have to use rtgmaster.library's Graphics Board features to use rtgmaster.library's TCP/IP features, if you do not WANT to... INPUTS SBase - Result of the call (C Syntax here...) SBase = OpenLibrary("bsdsocket.library",0); Socket - The Socket of the Client you want to close. You should ONLY use this function for Clients, NOT FOR SERVERS !!! SEE ALSO OpenClient(),OpenServer(),CloseServer(),RunServer(),RtgSend(),RtgRecv(),RtgAccept(),RtgIoctl(),GetUDPName(),RtgInAdr() rtgmaster.library/CloseRtgScreen rtgmaster.library/CloseRtgScreen NAME CloseRtgScreen -- Close a screen previously opened with OpenRtgScreen SYNOPSIS CloseRtgScreen(RtgScreen) A0 CloseRtgScreen(ULONG) FUNCTION Should close a RtgScreen opened by this sublibrary and free all of its resources. INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. SEE ALSO OpenRtgScreen() rtgmaster.library/CloseServer rtgmaster.library/CloseServer NAME CloseServer -- Closes the Server of a TCP/IP connection again SYNOPSIS CloseServer(SBase,Socket) A0 A1 CloseServer(struct Library *,struct TCP_Socket *) FUNCTION Terminates a "virtual connection" of TCP/IP and gives the Socket of the Server back to the system. For UDP it only gives the socket back to the system, as for UDP there is no connection to terminate. NOTE: It might appear strange to you, that you have to open bsdsocket.library yourselves and provide it as parameter. This is needed because of some internal problems of AmiTCP, that make it IMPOSSIBLE opening it inside a library. Look at the Docs for more information. You do NOT have to use rtgmaster.library's Graphics Board features to use rtgmaster.library's TCP/IP features, if you do not WANT to... INPUTS SBase - Result of the call (C Syntax here...) SBase = OpenLibrary("bsdsocket.library",0); Socket - The Socket of the Client you want to close. You should ONLY use this function for Servers, NOT FOR CLIENTS !!! SEE ALSO OpenClient(),OpenServer(),CloseClient(),RunServer(),RtgSend(),RtgRecv(),RtgAccept(),RtgIoctl(),GetUDPName(),RtgInAdr() rtgmaster.library/CopyRtgBlit rtgmaster.library/CopyRtgBlit NAME CopyRtgBlit -- Copy a rectangular array of pixels without conversion, with Modulo support and c2p support SYNOPSIS CopyRtgBlit(RtgScreen, BufferAdr, Array, Masked. Left, Top, Width, Height, WidthSrc, HeightSrc, SrcX, SrcY) A0 A1 A2 A3 D0 D1 D2 D3 D4 D5 D6 D7 CopyRtgBlit(struct RtgScreen *, APTR, APTR, ULONG, ULONG, ULONG,ULONG,ULONG,ULONG,ULONG,ULONG) FUNCTION Nearly the same like CopyRtgPixelArray, but also has Modulo Support. Additionally, it provides c2p for ECS/AGA, while CopyRtgPixelArray works in Planar Mode for ECS/AGA. CopyRtgBlit does only support synchronous c2p, as signalling would slow down the function a bit. It is faster than CallRtgC2P. In case of a asynchrone c2p being chosen, it uses a default synchronous c2p algorithm. In fact it is adviced to use this function, the old ones are mainly provided for backward compatibility. Masked feature not yet implemented for AGA. INPUTS RtgScreen - The RtgScreen to use BufferAdr - The Video RAM Base Address to use Array - The Source Array Masked - If Masked == 1, only pixels != color 0 will be overwritten Left - The Destination X Offset Top - The Destination Y Offset Width - The Width of the Blit Height - The Height of the Blit WidthSrc - The Width of the Source HeightSrc - The Height of the Source SrcX - The Source X Offset SrcY - The Source Y Offset SEE ALSO CopyRtgPixelArray(), CallRtgC2P() rtgmaster.library/CopyRtgPixelArray rtgmaster.library/CopyRtgPixelArray NAME CopyRtgPixelArray -- Copy a rectangular array of pixels directly to the graphics card memory without any conversion SYNOPSIS CopyRtgPixelArray(RtgScreen, BufferAdr, Array, Left, Top, Width, Height,SrcX,SrcY A0 A1 A2 D0 D1 D2 D3 D4 D5 CopyRtgPixelArray(struct RtgScreen *, APTR, APTR, ULONG, ULONG, ULONG, ULONG,ULONG,ULONG) FUNCTION Copies a rectangular array of pixels directly to the graphics card memory with no conversion. The array of pixels is assumed to be in the correct native format so it can be copied at maximum speed. The copy routine however does take segment boundaries in account (if required). This routine is mainly intended for machines which have relatively fast FastRAM compared to the speed of the graphics card RAM. This is usually on machines with a 32-bit accelerator card which have a Zorro-II graphics card installed. Note: For compatibility with rtgAMI.library, Array should contain at least ((((width+15)>>4)<<4)*Height Bytes. NOT YET IMPLEMENTED ON ECS/AGA. SrcX and SrcY not yet implemented. INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. BufferAdr - The address of the memory containing the actual screen graphics Array - Pointer to an array of pixels which is Width pixels wide, and Height pixels high. The size of the pixel is dependant on the ScreenBuffer your copying to. Make sure the array is in the correct native format. Left - X position of the top-left of the rectangular pixel array Top - Y position of the top-left of the rectangular pixel array Width - Width of the array in pixels Height - Height of the array in pixels SEE ALSO OpenRtgScreen(), WritePixelArray(), WritePixelRGBArray() rtgmaster.library/DrawRtgLine rtgmaster.library/DrawRtgLine NAME DrawRtgLine - draws a line on a RtgScreen SYNOPSIS DrawRtgLine(RtgScreen, BufferAdr, Color, X1, Y1, X2, Y2) A0 A1 D0 D1 D2 D3 D4 DrawRtgLine(struct RtgScreen *, APTR, ULONG, LONG, LONG, LONG, LONG) FUNCTION Draws a line on the screen which will be clipped if necessary. NOTE : X1<=X2 AND Y1<=Y2 !!! IMPLEMENTED WITH SUBLIBRARIES WITH AT LEAST VERSION 1.9 INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. BufferAdr - The address of the memory containing the actual screen graphics Color - Color number X1,Y1,X2,Y2 - Draws a line from (X1,Y1) to (X2,Y2) SEE ALSO OpenRtgScreen(), DrawRtgLineRGB() rtgmaster.library/DrawRtgLineRGB rtgmaster.library/DrawRtgLineRGB NAME DrawRtgLineRGB - draws a line on a RtgScreen SYNOPSIS DrawRtgLineRGB(RtgScreen, BufferAdr, Color, X1, Y1, X2, Y2) A0 A1 D0 D1 D2 D3 D4 DrawRtgLineRGB(struct RtgScreen *, APTR, ULONG, LONG, LONG, LONG, LONG) FUNCTION Draws a line on the screen which will be clipped if necessary. NOTE: X1<=X2 AND Y1<=Y2 !!! IMPLEMENTED WITH SUBLIBRARIES WITH AT LEAST VERSION 1.9 INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. BufferAdr - The address of the memory containing the actual screen graphics Color - A 32-bit value describing the color X1,Y1,X2,Y2 - Draws a line from (X1,Y1) to (X2,Y2) SEE ALSO OpenRtgScreen(), DrawRtgLine() rtgmaster.library/FillRtgRect rtgmaster.library/FillRtgRect NAME FillRtgRect - draws a filled rectangle to a RtgScreen SYNOPSIS FillRtgRect(RtgScreen, BufferAdr, Color, Left, Top, Width, Height) A0 A1 D0 D1 D2 D3 D4 FillRtgRect(struct RtgScreen *, APTR, ULONG, ULONG, ULONG, ULONG, ULONG) FUNCTION Draws a filled rectangle at the specified position on a RtgScreen. The BufferAdr is the starting address of the buffer the users wants to draw the rectangle in. The user has obtained this address using LockRtgScreen() and GetBufAdr(). The BufferAdr is needed to specify the correct buffer for screens which are double or triple buffered. This function should only work for Palette mapped modes, Color is the Color number of the palette. IMPLEMENTED WITH SUBLIBRARIES WITH AT LEAST VERSION 1.9 INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. BufferAdr - The address of the memory containing the actual screen graphics Color - Color number Left - X position of the top-left of the rectangle Top - Y position of the top-left of the rectangle Width - Width of the rectangle in pixels Height - Height of the rectangle in pixels SEE ALSO OpenRtgScreen(), FillRtgRectRGB() rtgmaster.library/FillRtgRectRGB rtgmaster.library/FillRtgRectRGB NAME FillRtgRectRGB - draws a filled rectangle to a RtgScreen SYNOPSIS FillRtgRectRGB(RtgScreen, BufferAdr, Color, Left, Top, Width, Height) A0 A1 D0 D1 D2 D3 D4 FillRtgRectRGB(struct RtgScreen *, APTR, ULONG, ULONG, ULONG, ULONG, ULONG) FUNCTION Draws a filled rectangle at the specified position on a RtgScreen. The BufferAdr is the starting address of the buffer the users wants to draw the rectangle in. The user has obtained this address using LockRtgScreen() and GetBufAdr(). The BufferAdr is needed to specify the correct buffer for screens which are double or triple buffered. This function should only work for True Color modes, Color is a 32 bit value which specifies what Color the pixel should be. The layout of this 32-bit value is as follows: %aaaaaaaa.rrrrrrrr.gggggggg.bbbbbbbb a = AlphaChannel (8-bits) which may or may not be ignored. The user will set this to zero if the user doesn't want to use AlphaChannel. r = Red component (8-bits) of the 24-bit RGB value g = Green component (8-bits) of the 24-bit RGB value b = Blue component (8-bits) of the 24-bit RGB value IMPLEMENTED WITH SUBLIBRARIES WITH AT LEAST VERSION 1.9 INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. BufferAdr - The address of the memory containing the actual screen graphics Color - A 32-bit value describing the color (see above) Left - X position of the top-left of the rectangle Top - Y position of the top-left of the rectangle Width - Width of the rectangle in pixels Height - Height of the rectangle in pixels SEE ALSO OpenRtgScreen(), FillRtgRect() rtgmaster.library/RtgScreenModeReq rtgmaster.library/FreeRtgScreenModeReq NAME FreeRtgScreenModeReq - frees the ScreenReq structure again SYNOPSIS FreeRtgScreenModeReq(myreq) A0 FreeRtgScreenModeReq(struct ScreenReq *) FUNCTION This function frees the memory allocated by RtgScreenModeReq again. Should be called after you need that data not any longer. Note: This function caused a system crash with an early Beta Version of rtgmaster.library. This does no longer happen, as this bug got fixed. This function is only in the master-library, not in the sublibraries. INPUTS myreq - The ScreenReq Structure returned by RtgScreenModeReq SEE ALSO RtgScreenModeReq() rtgmaster.library/FreeRtgSRList rtgmaster.library/RtgAllocSRList NAME FreeRtgSRList - Frees a list of ScreenReq's SYNOPSIS FreeRtgSRList(sr) A0 FreeRtgSRList(struct ScreenReqList *) FUNCTION This function frees a list of ScreenReq structures allocated by RtgAllocSRList again. INPUTS sr - the List SEE ALSO RtgScreenModeReq(), FreeRtgScreenModeReq(), RtgAllocSRList() rtgmaster.library/FreeScreenModes rtgmaster.library/FreeScreenModes NAME FreeScreenModes - frees a list of screenmodes SYNOPSIS FreeScreenModes(array of screenmodes) A0 FreeScreenModes(APTR) FUNCTION This function should free a previously with GetScreenModes() allocated list of ScreenMode structures, including everything else GetScreenModes() allocated. Be prepared to handle a NULL pointer. THIS FUNCTION IS ONLY IN SUBLIBRARIES, NOT IN THE MASTER-LIBRARY ITSELF. IT IS ONLY CALLED BY RTGMASTER.LIBRARY ITSELF. INPUTS array - an array of ScreenMode structures or NULL SEE ALSO GetScreenModes() rtgmaster.library/GetBufAdr rtgmaster.library/GetBufAdr NAME GetBufAdr -- Get the address for one of the buffers from a multi-buffered RtgScreen SYNOPSIS address = GetBufAdr(RtgScreen, Buffer) D0 A0 D0 APTR GetBufAdr(ULONG, ULONG) FUNCTION If the user is using multi-buffered screens, it might be usefull to know where the two buffers start in memory. After a LockRtgScreen() the user can call this function with a RtgScreen handle and a number to get the address of the corresponding buffer. The address is only valid if the RtgScreen is currently locked using LockRtgScreen(). INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. Buffer - The buffer number the user wants the address of RESULTS address - the address of the buffer, or NULL for failure SEE ALSO LockRtgScreen(), OpenRtgScreen() rtgmaster.library/GetRtgScreenData rtgmaster.library/GetRtgScreenData NAME GetRtgScreenData -- Fills a TagList with data about the RtgScreen SYNOPSIS GetRtgScreenData(RtgScreen, TagList) A0 A1 GetRtgScreenData(ULONG, struct TagItem *) FUNCTION This function should fill the TI_DATA fields of the passed in TagList with the requested information. See for available tags and descriptions in the .i/.h file. NOTE: Starting with sublibrary V2.2, this function can also be used to find out to what BUSSYSTEM a Graphics Board is connected. In the original design of rtgmaster an extra function was intended for that, but now it is the job of GetRtgScreenData. INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. TagList - TagList which should be filled in with requested info. SEE ALSO OpenRtgScreen(), GetBufAdr() rtgmaster.library/GetScreenModes rtgmaster.library/GetScreenModes NAME GetScreenModes - builds a list of available screenmodes SYNOPSIS array of ScreenMode structures = GetScreenModes() D0 APTR GetScreenModes() FUNCTION This function should return a linked list of ScreenMode structures describing all the available ScreenModes available to this sublibrary. If there aren't any, or you couldn't allocate the memory for the list then return 0. THIS FUNCTION IS ONLY IN SUBLIBRARIES, NOT IN THE MASTER-LIBRARY ITSELF. IT IS ONLY CALLED BY RTGMASTER.LIBRARY ITSELF. RESULTS array - an array of ScreenMode structures or NULL SEE ALSO FreeScreenModes() rtgmaster.library/GetUDPName rtgmaster.library/GetUDPName NAME GetUDPName - Get the sockaddr_in structure of a UDP Client/Server SYNOPSIS name = GetUDPName(SocketBase, sock) A0 A1 struct sockaddr_in *GetUDPName(struct Library *, struct RTG_Socket *) FUNCTION If this is UDP, you will get the sockaddr_in structure of a Client/Server, else you will get 0. For what this is intended, read RtgRecv/RtgSend/RtgInAdr. And of course the Docs of rtgmaster.library where detailed information about TCP, IP and UDP is found. NOTE: It might appear strange to you, that you have to open bsdsocket.library yourselves and provide it as parameter. This is needed because of some internal problems of AmiTCP, that make it IMPOSSIBLE opening it inside a library. Look at the Docs for more information. You do NOT have to use rtgmaster.library's Graphics Board features to use rtgmaster.library's TCP/IP features, if you do not WANT to... Actually this function is now inside rtgextra.library INPUTS SBase - Result of the call (C Syntax here...) SBase = OpenLibrary("bsdsocket.library",0); Socket - The Socket of the Client you want to close. You should ONLY use this function for Clients, NOT FOR SERVERS !!! RESULTS name - The sockaddr_in structure of the Client/Server SEE ALSO OpenClient(),OpenServer(),CloseServer(),RunServer(),RtgSend(),RtgRecv(),RtgAccept(),RtgIoctl(),RtgInAdr() rtgmaster.library/LoadRGBRtg rtgmaster.library/LoadRGBRtg NAME LoadRGBRtg - changes one or more colors of a RtgScreen SYNOPSIS LoadRGBRtg(RtgScreen, Table) A0 A1 LoadRGBRtg(ULONG, APTR) FUNCTION Enables the user to change one or more colors of his/her screen. This function only works for RtgScreens which have a palette, and thus won't work for the True-color modes. INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. Table - A pointer to a series of records which describe which colors to modify NOTES Passing a NULL Table must be ignored. The format of the Table passed is a series of records, each with the this format: WORD Count value: Number of colors to load WORD Number of first color to be loaded After these two words, a list of 3 Longs follow as many times as specified by the first word. These 3 longwords represent the left justified 32 bit RGB value. And then the list repeats until ended with a count value of 0. See for more information about the table graphics/LoadRGB32. This function must use the same format. SEE ALSO OpenRtgScreen(), graphics/LoadRGB32() rtgmaster.library/LockRtgScreen rtgmaster.library/LockRtgScreen NAME LockRtgScreen -- Locks a RtgScreen (prevents it from being moved in memory) SYNOPSIS address = LockRtgScreen(RtgScreen) D0 A0 APTR LockRtgScreen(ULONG) FUNCTION This function should make sure that the screen is not moved from it's current location in memory. In other words, it will guarantee that the address you get back from this function remains valid until you call UnlockRtgScreen(). The result from this function should be the address of the buffer associated with the screen either in the graphics cards own memory or the computers memory. For multi-buffered screens the return-address must point to buffer 0 for this RtgScreen. To get the addresses of the other buffers the user will use GetBufAdr(). LockRtgScreen and UnlockRtgScreen functions must nest, which means you must call an UnlockRtgScreen for every LockRtgScreen. The field rs_Locks in the RtgScreen structure should be used to keep track of the number of times a screen was locked. Note : On some Graphics Boards this function will take some CPU time to happen, so it is advised ONLY to call it *once* at the start of your code (And UnlockRtgScreen *once* at the end of your code, to be on the sure side...) INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. RESULTS address - The address of the (first) buffer of this screen. SEE ALSO UnlockRtgScreen(), OpenRtgScreen(), GetBufAdr() rtgmaster.library/OpenClient rtgmaster.library/OpenClient NAME OpenClient -- Open a TCP/IP Client SYNOPSIS Socket = OpenClient(SBase,host,port,mode,protocol) D0 A0 A1 D0 D1 D2 struct RTG_Socket *OpenClient(struct Library *,char *,int,int,int) FUNCTION For TCP, this function opens a "virtual connection" between two applications. For UDP it creates a socket that can be used by the application to transfer data connectionless to other applications. This function is the "Client part" of the connection. The protocol being used is TCP/IP. For more information, look at the docs. There is a chapter about "TCP/IP programming for newcomers", that shows you, how to support netework gaming for your computer game, even if you never heard of TCP/IP before :) Up to now rtgmaster.library only supports the "protocol stack" AmiTCP, no AS225 support up to now. Runs for sure with AmiTCP 4.0 demo from Aminet, i do not know about earlier versions. NOTE: It might appear strange to you, that you have to open bsdsocket.library yourselves and provide it as parameter. This is needed because of some internal problems of AmiTCP, that make it IMPOSSIBLE opening it inside a library. Look at the Docs for more information. You do NOT have to use rtgmaster.library's Graphics Board features to use rtgmaster.library's TCP/IP features, if you do not WANT to... Actually this function is now inside rtgextra.library. INPUTS SBase - Result of the call (C Syntax here...) SBase = OpenLibrary("bsdsocket.library",0); host - hostname of the "Server", to which you want to connect your application (for example "194.55.101.26"). port - The port your application uses. For example 4000. Be sure to use a number bigger than 3000, small numbers are often used for different protocols in TCP/IP. For example 21 is telnet. mode - The mode of the connection. Up to now only SOCK_STREAM is supported ("virtual connection using a datastream"). SOCK_DGRAM probably will give you a UDP connection, but i do not know enough about UDP to make this really working... maybe in a future version... protocol - The protocol To be used. Set this to 0 currently. mode SOCK_STREAM and protocol 0 will result in a TCP connection. RESULTS Socket - The "Socket" of the Application. See more in the docs. SEE ALSO OpenServer(),CloseClient(),CloseServer(),RunServer(),RtgSend(),RtgRecv(),RtgAccept(),RtgIoctl(),GetUDPName(),RtgInAdr() rtgmaster.library/OpenRtgScreen rtgmaster.library/OpenRtgScreen NAME OpenRtgScreen -- Open a screen SYNOPSIS RtgScreen = OpenRtgScreen(ScreenReq, RtgTags) D0 A0 A1 struct RtgScreen *OpenRtgScreen(struct ScreenReq *, struct TagItem *) FUNCTION This function should open the screen which falls within the parameters specified by the user. If this function can't deliver such a screen than it will fail and will return zero. Note that the Width and Height values you get from rtgmaster.library have been checked to see if they are valid for this screenmode. Also note that RtgTags may be zero. INPUTS RtgTags - Pointer to (an array of) TagItem structures, terminated by the value TAG_END (0). ScreenReq - ScreenReq structure as returned by RtgScreenModeReq() of rtgmaster.library, see rtg.i for more information Each TagItem is an optional tagged data structure which identifies a parameter to OpenRtgScreen(). The applicable tag ID values for TagItem.ti_Tag and their corresponding data can be found in the .i/.h file where the Tags for OpenRtgScreen() are specified. RESULTS RtgScreen - A handle for the screen you opened. The user may later use this handle to get information about this screen or perform actions like setting the palette or double/triple buffering. You should returns NULL if the screen couldn't be opened. SEE ALSO CloseRtgScreen() rtgmaster.library/OpenServer rtgmaster.library/OpenServer NAME OpenServer - Opens a TCP/IP Server SYNOPSIS Socket=OpenServer(SBase,port,mode,protocol) D0 A0 D0 D1 D2 struct TCP_Connect *OpenServer(struct Library *,int,int,int) FUNCTION For TCP this function opens a "virtual connection" between two applications. For UDP it creates a server that UDP clients can access. This function is the "Server part" of the connection. The protocol being used is TCP/IP. Up to now, as to the "transport protocol", only TCP is supported, no UDP (maybe in a future version ???) For more information, look at the docs. There is a chapter about "TCP/IP programming for newcomers", that shows you, how to support netework gaming for your computer game, even if you never heard of TCP/IP before :) Up to now rtgmaster.library only supports the "protocol stack" AmiTCP, no AS225 support up to now. Runs for sure with AmiTCP 4.0 demo from Aminet, i do not know about earlier versions. NOTE: It might appear strange to you, that you have to open bsdsocket.library yourselves and provide it as parameter. This is needed because of some internal problems of AmiTCP, that make it IMPOSSIBLE opening it inside a library. Look at the Docs for more information. You do NOT have to use rtgmaster.library's Graphics Board features to use rtgmaster.library's TCP/IP features, if you do not WANT to... Actually this function is now inside rtgextra.library. INPUTS SBase - Result of the call (C Syntax here...) SBase = OpenLibrary("bsdsocket.library",0); port - The port your application uses. For example 4000. Be sure to use a number bigger than 3000, small numbers are often used for different protocols in TCP/IP. For example 21 is telnet. mode - The mode of the connection. Up to now only SOCK_STREAM is supported ("virtual connection using a datastream"). SOCK_DGRAM probably will give you a UDP connection, but i do not know enough about UDP to make this really working... maybe in a future version... protocol - The protocol To be used. Set this to 0 currently. mode SOCK_STREAM and protocol 0 will result in a TCP connection. RESULTS Socket - The "Socket" of the Application. See more in the docs. SEE ALSO OpenClient(),CloseClient(),CloseServer(),RunServer(),RtgSend(),RtgRecv(),RtgAccept(),RtgIoctl(),GetUDPName(),RtgInAdr() rtgmaster.library/RtgAccept rtgmaster.library/RtgAccept NAME RtgAccept - Let the server accept a connection deminded by a Client SYNOPSIS Socket=RtgAccept(SBase,Socket) D0 A0 A1 struct RTG_Socket *RtgAccept(struct Library *,struct RTG_Socket *) FUNCTION if you do not use the RunServer function (you do not use it, if you only do a point-to-point connection), you have to do this call on Server side to wait for the Client to connect. If you use RunSercer, DO NOT USE IT. It is only for connecting exactly TWO systems (one being the server, one the client), not for connecting ONE server with SEVERAL clients... Also do not use it for UDP connection. RtgAccept is only needed for TCP. It does not work with UDP. NOTE: It might appear strange to you, that you have to open bsdsocket.library yourselves and provide it as parameter. This is needed because of some internal problems of AmiTCP, that make it IMPOSSIBLE opening it inside a library. Look at the Docs for more information. You do NOT have to use rtgmaster.library's Graphics Board features to use rtgmaster.library's TCP/IP features, if you do not WANT to... Actually this function is now inside rtgextra.library. INPUTS SBase - Result of the call (C Syntax here...) SBase = OpenLibrary("bsdsocket.library",0); Socket - the Socket of the Server RESULTS Socket - The "Socket" of the Client, that connected. See more in the docs. SEE ALSO OpenClient(),CloseClient(),CloseClient(),CloseServer(),RunServer(),RtgSend(),RtgRecv(),RtgIoctl(),GetUDPName(),RtgInAdr() rtgmaster.library/RtgAllocSRList rtgmaster.library/RtgAllocSRList NAME RtgAllocSRList - Allocates a list of certain ScreenReq Structures SYNOPSIS RtgAllocSRList(tags) A0 struct ScreenReqList *RtgAllocSMList(struct TagItem *) FUNCTION This function provides a list of ScreenReq Structures for all Screenmodes that fit for the provided tags. It can be used instead of the RtgMaster ScreenMode-Requester. The Memory is freed again with FreeRtgScreenReqList(). INPUTS tags - tags describing the modes SEE ALSO RtgScreenModeReq(), FreeRtgScreenModeReq(), FreeRtgSRList() rtgmaster.library/RtgBestSR rtgmaster.library/RtgBestSR NAME RtgBestSR - calculates the best to be used ScreenReq Structure SYNOPSIS RtgBestSR(tags) A0 struct ScreenReq *RtgBestSR(struct TagItem *) FUNCTION This function looks for the best to be used ScreenMode for the provided tags and returns a ScreenReq Structure for it. INPUTS tags - The Tags for the Screenmode SEE ALSO RtgScreenModeReq(), FreeRtgScreenModeReq(), FreeRtgSRList(), AllocRtgSRList() rtgmaster.library/RtgBlit rtgmaster.library/RtgBlit NAME RtgBlit - Performs a Blit without waiting SYNOPSIS RtgBlit(RtgScreen,SrcBuf,DstBuf,SrcX,SrcY,DstX,DstY,Width,Height,Minterm) A0 a1 a2 d0 d1 d2 d3 d4 d5 d6 void RtgBlit(struct RtgScreen *, ULONG, ULONG, ULONG, ULONG, ULONG, ULONG, ULONG, ULONG,UBYTE) FUNCTION This function blits the rectangle at (SrxX,SrcY) in the Buffer with the NUMBER SrcBuf (0-2) to the position (DstX,DstY) in the Buffer with the NUMBER DstBuf (0-2). The Blit has Width Width and Height Height. For most GFX Boards this function is the fastest way to move graphics data. Note : On some boards (for example EGS Boards) this function might wait on the Blitter to be finished as this can't be done in an other way with these boards. For these boards WaitRtgBlit simply does nothing. Note : The source and the destination rectangle should NOT OVERLAP !!! Valid minterms : $30,$50,$60,$80, $C0. NO OTHER MINTERMS ARE VALID. OTHER MINTERMS MIGHT WORK WITH SOME SUBLIBRARIES, BUT PROBABLY NOT WITH ALL SUBLIBRARIES. Note: This function MIGHT or MIGHT NOT work with some of the Minterms on rtgEGS.library... at least for $C0 it works for all... for the rest... i do not see myself as Betatester of half-finished WB-Emulations... THIS FUNCTION IS IMPLEMENTED IN SUBLIBRARIES STARTING WITH VERSION 1.8 INPUTS RtgScreen - The RtgScreen where the Blit should happen SrcBuf - The Buffer NUMBER (not address !!!) of the Source Buffer DstBuf - The Buffer NUMBER (not address !!!) of the Destination Buffer SrcX - The X coordinate of the source Rectangle SrcY - The Y coordinate of the source Rectangle DstX - The X coordinate of the Destination Rectangle DstY - The Y coordinate of the Destination Rectangle Width - The Width of the Blit Height - The Height of the Blit minterm - the minterm of the Blit, defined as usual SEE ALSO OpenRtgScreen(), WaitRtgBlit(), SwitchScreens() rtgmaster.library/RtgBltClear rtgmaster.library/BltClear SYNOPSIS RtgBltClear(RtgScreen,BufNum,xpos,ypos,width,height) a0 a1 d0 d1 d2 d3 RtgBltClear(struct RtgScreen *,ULONG,ULONG,ULONG,ULONG,ULONG) FUNCTION This function clears a rectangular area using the GFX Board blitter. For people who wonder, why i did not implement that the "usual" way, like done in graphics.library : The graphics.library function would not be possible under EGS, therefor i did it this way. The function usually does not wait for the Blitter, use WaitRtgBlit for this (unless under EGS... like explained in RtgBlit and WaitRtgBlit...) THIS FUNCTION IS IMPLEMENTED WITH SUBLIBRARIES STARTING WITH VERSION 1.8 INPUTS RtgScreen - The RtgScreen BufNum - The NUMBER of the concerned Buffer, between 0 and 2 (NOT the buffer address !!!) xpos - the start x position of the rectangle to be cleared ypos - the start y position of the rectangle to be cleared width - the width of the rectangle height - the height of the rectangle SEE ALSO RtgBlit(),WaitRtgBlit() rtgmaster.library/RtgCheckVSync rtgmaster.library/RtgCheckVSync NAME RtgCheckVSync - Check, if the ray is currently inside Vertical Blank Gap SYNOPSIS RtgCheckVSync(RtgScreen) A0 int RtgCheckVSync(struct RtgScreen *) FUNCTION This function returns 0, if the ray is OUTSIDE the Vertical Blank Gap, 1, if it is INSIDE, and 2, if this is not supported by the GFX Board (in which case a RtgWaitTOF() will be done by this function). INPUTS RtgScreen - The RtgScreen of the GFX Board to be used SEE ALSO RtgWaitTOF() rtgmaster.library/RtgClearPointer rtgmaster.library/RtgClearPointer NAME RtgClearPointer - resets the pointer to its default image SYNOPSIS RtgClearPointer(RtgScreen) A0 void RtgClearPointer(struct RtgScreen *) FUNCTION This restores the default image of the mousepointer. This is very useful, if you changed it with RtgSetPointer, but sometimes want the default pointer image, too. The pointer is only changed on THIS RtgScreen. INPUTS RtgScreen - The RtgScreen, which pointer should be resetted... NOTES Not implemented yet on rtgPICA.library and rtgEGS.library SEE ALSO RtgSetPointer() rtgmaster.library/RtgCloseFont rtgmaster.library/RtgCloseFont NAME RtgCloseFont - closes an AmigaFont SYNOPSIS RtgCloseFont(RtgScreen,font) A0 A1 void RtgCloseFont(struct RtgScreen *,void *) FUNCTION This function closes an AmigaFont on a RtgScreen, much the same way, like OpenDiskFont does for Intuition Screens. The font parameter of the call is not for all WB Emulations a TextFont pointer. Don't use CloseFont with rtgmaster.library, use RtgCloseFont, for the best possible compatibility with all Sublibraries !!! INPUTS RtgScreen - an RtgScreen font - a Font pointer. the structure of it is PRIVATE to rtgmaster.library (and not the same for all sublibraries...) NOTES Not yet implemented for rtgPICA.library SEE ALSO RtgOpenFont(),RtgSetFont(),RtgSetTextMode(),RtgText(),RtgSetTextModeRGB rtgmaster.library/RtgInAdr rtgmaster.library/RtgInAdr NAME RtgInAdr - Find out the IP Address of a Receiver/Sender SYNOPSIS ip = RtgInAdr(SBase,si) D0 A0 A1 char *RtgInAdr(struct Library *,struct sockaddr_in *) FUNCTION This function finds out the IP Address of a Receiver/Sender. You get back the sockaddr_in structure of a receiver/sender by RtgRecv/RtgSend or by using GetUDPName. This function ONLY works for UDP, not for TCP !!! It is used to differentiate Clients running on different machines from each other, if one does a Multiple Client "connection" (should not be called like that, as UDP is connectionless, but do you know a better term ?), without using RunServer... Of course this function can't differentiate multiple Clients running on the same machine... NOTE: It might appear strange to you, that you have to open bsdsocket.library yourselves and provide it as parameter. This is needed because of some internal problems of AmiTCP, that make it IMPOSSIBLE opening it inside a library. Look at the Docs for more information. You do NOT have to use rtgmaster.library's Graphics Board features to use rtgmaster.library's TCP/IP features, if you do not WANT to... Actually this function is now inside rtgextra.library. INPUTS SBase - Result of the call (C Syntax here...) SBase = OpenLibrary("bsdsocket.library",0); si - Special structure returned by above mentioned calls RESULTS ip - IP Address as string (for example "194.55.101.26") SEE ALSO OpenClient(),OpenServer(),CloseClient(),CloseClient(),CloseServer(),RunServer(),RtgSend(),RtgAccept(),GetUDPName() rtgmaster.library/RtgInitBob rtgmaster.library/RtgInitBob NAME RtgInitBob - Initializes a RtgBob SYNOPSIS RtgInitBob(RtgScreen, RtgBob,BackAdr,BufferAdr,xpos,ypos,display) A0 A1 A2 A3 D0 D1 D2 RtgInitBob(struct RtgBob *) FUNCTION Initializes a RtgBob for display. This has to be done before using a RtgBob. If the Bob was already initted, the Bob is simply moved to the position given (but you can init and display it in the same function call, also). BackAdr is the BackBuffer to be used with the Bob, this BackBuffer CANNOT be used for Doublebuffering or other purposes (but you can use a Fastram-Buffer as Backbuffer, also). You only have to supply the BackBuffer the first time you use the Bob. Rtgmaster Bobs are limited to 32x32 resolutions. Not yet implemented. INPUTS RtgBob - The RtgBob structure BackAdr - The VideoRAM or FastRAM Buffer for Bob Refresh BufferAdr - The Video RAM Buffer, where the Bob should be displayed xpos - The xposition the Bob should be placed ypos - The yposition the Bob should be placed display - If this is 1, the Bob will be switched on, if 0, it will be disabled. SEE ALSO rtgmaster.library/RtgIoctl rtgmaster.library/RtgIoctl NAME RtgIoctl - Set a Socket to "Blocking" or to "Non-Blocking" mode SYNOPSIS result = RtgIoctl(SBase,Socket,arg) D0 A0 A1 A2 int RtgIoctl(struct Library *,struct RTG_Socket *,long *) FUNCTION This function determins, if RtgRecv and RtgSend will WAIT will the data was transmitted, or if they fail, if the data currently could not be transmitted. If arg POINTS to the VALUE 1, we have "non-blocking" (it does not wait), if it POINTS to 0, we have "blocking" (it waits). Default (if you do not call RtgIoctl at all) is "blocking". NOTE: It might appear strange to you, that you have to open bsdsocket.library yourselves and provide it as parameter. This is needed because of some internal problems of AmiTCP, that make it IMPOSSIBLE opening it inside a library. Look at the Docs for more information. You do NOT have to use rtgmaster.library's Graphics Board features to use rtgmaster.library's TCP/IP features, if you do not WANT to... RtgIoctl is a VERY CPU TIME INTENSIVE FUNCTION !!! Only call it during the INITIALIZATION of the network !!! My suggestion : Run the server in "blocking" mode, the Clients in "nonblocking" mode... seems to be the fastest... Actually this function is now inside rtgextra.library. INPUTS SBase - Result of the call (C Syntax here...) SBase = OpenLibrary("bsdsocket.library",0); Socket - The Socket of the application, which socket is to be modified arg - "Non-Blocking" or "Blocking" (a pointer) RESULTS result - 0 on success, -1 on fail (should not fail,normally...) SEE ALSO OpenClient(),OpenServer(),CloseClient(),CloseClient(),CloseServer(),RunServer(),RtgSend(),RtgAccept(),GetUDPName(),RtgInAdr() rtgmaster.library/RtgOpenFont rtgmaster.library/RtgOpenFont NAME RtgOpenFont - opens an AmigaFont SYNOPSIS font = RtgOpenFont(RtgScreen,ta) D0 A0 A1 void * RtgOpenFont(struct RtgScreen *,struct TextAttr *) FUNCTION This function loads an AmigaFont to memory, for the usage on a RtgScreen, much the same way, like OpenDiskFont does for Intuition Screens. ta is a normal TextAttr pointer, like for OpenDiskFont for diskfont.library, but the RESULT is not for all WB Emulations a TextFont pointer. Don't use OpenDiskFont or OpenFont with rtgmaster.library, use RtgOpenFont, for the best possible compatibility with all Sublibraries !!! INPUTS RtgScreen - an RtgScreen ta - a TextAttr structure, like defined in graphics/text.i (or .h) RESULTS font - A pointer to a font pointer. It's internal structure is PRIVATE to rtgmaster.library, and NOT THE SAME for all sublibraries NOTES Not yet implemented for rtgPICA.library SEE ALSO RtgCloseFont(),RtgSetFont(),RtgSetTextMode(),RtgText(),RtgSetTextModeRGB rtgmaster.library/RtgRecv rtgmaster.library/RtgRecv NAME RtgRecv - The Socket of this application receives data from a connected socket SYNOPSIS length = RtgRecv(SBase,Socket,message,sender,len) D0 A0 A1 A2 A3 D0 int RtgRecv(struct Library *,struct RTG_Socket *,struct char *,struct sockaddr_in *,int) FUNCTION This function is no longer compatible to rtgmaster.library V6 and below !!! This function gets data to the application that is sent to its socket by a socket that is connected to the socket of the Application (it is not that difficult to understand like it sounds... read the docs :) ) If the "virtual connection" (or the "connectionless connection" or what this is called for UDP... :) ) is "blocking", it WAITS, if there is no message available on the socket, till one is available. If it is "non-blocking", it returns -1, if no message is available (see RtgIoctl for more details about "blocking" and "Non-Blocking". The default is "Blocking", BTW...) Sender is a special structure that you can use to find out from what IP Address the message was sent. You can convert it to an IP Address using RtgInAdr. This only works with UDP (with TCP, you differentiate Clients from each other with the socket number...). Appearently, you CAN'T differentiate Clients that run on the same machine !!! Sender is NOT allocated by the function, you have to provide the structure... For TCP you simple provide a 0 for Sender. It will be ignored. You can use this feature to do multiple connection without using RunServer (that does not support UDP up to now anyways...). NOTE: For *TCP* you provide the Socket of the Application which you want to contact. For *UDP* you provide your OWN'S Socket. Important difference !!! NOTE: It might appear strange to you, that you have to open bsdsocket.library yourselves and provide it as parameter. This is needed because of some internal problems of AmiTCP, that make it IMPOSSIBLE opening it inside a library. Look at the Docs for more information. You do NOT have to use rtgmaster.library's Graphics Board features to use rtgmaster.library's TCP/IP features, if you do not WANT to... NOTE: It is NOT possible to give Socket->s (the Socket Number) of a Client to the Server using RtgRecv or RunServer !!! You will have to examine inbuffer->num[x] to find out which Socket was the Sender !!! Also len should NEVER be bigger than the actual message, or you might get a lot of strange results !!! Actually this function is now inside rtgextra.library. INPUTS SBase - Result of the call (C Syntax here...) SBase = OpenLibrary("bsdsocket.library",0); Socket - The Socket of THIS application message - The buffer, to which supplied messages will be put Sender - The Function will fill in data about the Sender to this structure. len - The length of the message to wait for RESULTS length - The length of the message received. If it is smaller than the message, you waited for, do a RtgRecv once more... NOTE: If a message was received that is too long to fit to the buffer, some Bytes might be discarded. So you should not send more Bytes than you want to receive... use a standard Package Size at best... SEE ALSO OpenClient(),CloseClient(),CloseClient(),CloseServer(),RunServer(),RtgSend(),RtgAccept(),RtgIoctl(),GetUDPName(),RtgInAdr() rtgmaster.library/RtgScreenAtFront rtgmaster.library/RtgScreenAtFront NAME RtgScreenAtFront - determines if a RtgScreen is at front SYNOPSIS boolean = RtgScreenAtFront(RtgScreen) A0 RtgScreenAtFront(struct RtgScreen *) FUNCTION This function should determine if this RtgScreen is currently at front. It should return TRUE (0xfffffff) if the screen is in front of all other screens, and FALSE (0) if the screen is behind (partially or completely) an other screen. Note that this function will not be heavily reliable, since the user might switch screens at any time. INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. RESULTS boolean - TRUE if screen is at front, FALSE otherwise. SEE ALSO OpenRtgScreen() rtgmaster.library/RtgScreenModeReq rtgmaster.library/RtgScreenModeReq NAME RtgScreenModeReq -- Opens a ScreenMode requester SYNOPSIS ScreenReq = RtgScreenModeReq(ScreenModeTags) D0 A0 struct ScreenReq *RtgScreenModeReq(struct TagItem *) FUNCTION Opens a ScreenMode requester which displays all available ScreenModes to the user, depending on the Tags which are passed to this function. The functions returns a pointer to a ScreenReq structure or NULL for failure or if the user cancelled the requester. The ScreenReq holds various information which the user selected, like width, height, screenmode and depth. THIS FUNCTION IS ONLY IN THE MASTER-LIBRARY. It handles the Screenmodes for ALL sublibraries. Note: The Screenmode-Requester provided with an early Beta of the rtgmaster.library was VERY buggy. It got completely replaced by a new one for this version of the library. INPUTS ScreenModeTags - Pointer to (an array of) TagItem structures, terminated by the value TAG_END (0). The description for the various tags can be found in the .i/.h file (smr_Tags). NOTE: The Tags changed a lot since the early Beta release of the library. RESULTS ScreenReq - A pointer to a ScreenReq structure or NULL for failure SEE ALSO OpenRtgScreen(),FreeRtgScreenModeReq() rtgmaster.library/RtgSend rtgmaster.library/RtgSend NAME RtgSend - The Socket of this application sends data to a connected socket SYNOPSIS length = RtgSend(SBase,Socket,message,Receiver,len) D0 A0 A1 A2 A3 D0 int RtgSend(struct Library *,struct RTG_Socket *,struct char *,struct sockaddr_in *,int) FUNCTION This function is no longer compatible to rtgmaster.library V6 and below !!! This function puts data from the application to the socket of an application that is connected to the socket of the Application (it is not that difficult to understand like it sounds... read the docs :) ) If the "virtual connection" (well, this term does not fit for UDP, as it is connectionless, but i do not know how to call it else... :) ) is "blocking", it WAITS, if there is no message available on the socket, till one is available. If it is "non-blocking", it returns -1, if no message is available (see RtgIoctl for more details about "blocking" and "Non-Blocking". The default is "Blocking", BTW...) Receiver is a special structure that you can use to tell the receiver your IP Address. You get your IP Address with GetUDPName (works only for UDP... for TCP this returns 0...). For TCP you provide simply 0 for Receiver, it will be ignored. You can convert it to an IP Address using RtgInAdr. This only works with UDP (with TCP, you differentiate Clients from each other with the socket number...). Appearently, you CAN'T differentiate Clients that run on the same machine !!! You can use this feature to do multiple connection without using RunServer (that does not support UDP up to now anyways...). NOTE: For *TCP* you provide the Socket of the Application which you want to contact. For *UDP* you provide your OWN'S Socket. Important difference !!! NOTE: It might appear strange to you, that you have to open bsdsocket.library yourselves and provide it as parameter. This is needed because of some internal problems of AmiTCP, that make it IMPOSSIBLE opening it inside a library. Look at the Docs for more information. You do NOT have to use rtgmaster.library's Graphics Board features to use rtgmaster.library's TCP/IP features, if you do not WANT to... NOTE: It is NOT possible to give Socket->s (the Socket Number) of a Client to the Server using RtgRecv or RunServer !!! You will have to examine inbuffer->num[x] to find out which Socket was the Sender !!! Also len should NEVER be bigger than the actual message, or you might get a lot of strange results !!! Actually this function is now inside rtgextra.library. INPUTS SBase - Result of the call (C Syntax here...) SBase = OpenLibrary("bsdsocket.library",0); Socket - The Socket of THIS application message - The message to be sent (an ASCII string, actually...) Receiver - The data you got from GetUDPName, tells the receiver your IP address... len - The length of the string to send ... RESULTS length - The length of the message sent. If it is smaller than the message, you sent, do a RtgSend once more... Probably the socket you sent to was quite busy with other messages currently... NOTE: If the send fails at all, maybe your message was too long for TCP/IP ? (As to the allowed package sizes, 1 KB works for sure... i do not know exactly how much more is possible...) SEE ALSO OpenClient(),CloseClient(),CloseClient(),CloseServer(),RunServer(),RtgRecv(),RtgAccept(),RtgIoctl(),GetUDPName(),RtgInAdr() rtgmaster.library/RtgSetFont rtgmaster.library/RtgSetFont NAME RtgSetFont - sets an AmigaFont to an RtgScreen SYNOPSIS RtgSetFont(RtgScreen,font) A0 A1 void RtgSetFont(struct RtgScreen *,void *) FUNCTION This function sets an AmigaFont (that was opened using RtgOpenFont tomemory before) to an RtgScreen. Following RtgText() calls will use this font, now. INPUTS RtgScreen - an RtgScreen font - a Font pointer. the structure of it is PRIVATE to rtgmaster.library (and not the same for all sublibraries...) NOTES Not yet implemented for rtgPICA.library SEE ALSO RtgOpenFont(),RtgCloseFont(),RtgSetTextMode(),RtgText(),RtgSetTextModeRGB rtgmaster.library/RtgSetPointer rtgmaster.library/RtgSetPointer NAME RtgSetPointer - sets the pointer to a new image SYNOPSIS RtgSetPointer(RtgScreen,pointer,Width,Height,OffsetX,OffsetY) A0 A1 D0 D1 D2 D3 void RtgSetPointer(struct RtgScreen *,UWORD *,WORD,WORD,WORD,WORD) FUNCTION This function sets the mousepointer to a new image for this RtgScreen. The structure pointer is exactly the same like taken from intuition.library command SetPointer (the data definition of a Simple Sprite). Different from this only is that the image HAS TO BE 16x18 pixels size. If you want a smaller pointer, modify the Width/Height values and set that pixels that you do not need to 0. But the SIZE of the structure has to be 16x18 pixels (72 Bytes). An example : UWORD Hoehe[2] { 0x...,0x... // first line ... 0x...,0x... // 18th line } Look at graphics.library SimpleSprite documentation for more information (01,10,11 are the three pointer colors,00 is transperent, each of the two words of a line determines ONE BIT of the 2-Bit mousepointer). INPUTS RtgScreen - The RtgScreen, which pointer should be resetted... pointer - pointer image, see above Width - Actual Width of the pointer Height - Actual Height of the pointer OffsetX - Display Offset for the pointer, from the mouseposition OffsetY - Display Offset for the pointer, from the mouseposition NOTES Not implemented yet on rtgPICA.library and rtgEGS.library Do NOT specifically demand Chipram for the pointer array. Else your program won't run on the DraCo. rtgmaster.library will handle this itself, that the pointer-image will end in Chipram for ECS/AGA, in ANYTHING AVAILABLE on GFX Board system. So simply allocate RAM for the pointer image, without simply demanding Chipram or Fastram (as DraCo needs FastRam, and ECS/AGA need Chipram here... but well... rtgmaster.library takes care of this :) ) SEE ALSO RtgClearPointer() rtgmaster.library/RtgSetTextMode rtgmaster.library/RtgSetTextMode NAME RtgSetTextMode - sets text color and drawing mode SYNOPSIS RtgSetTextMode(RtgScreen,fgcolor,bgcolor,drmode) A0 D0 D1 D2 void RtgSetTextMode(struct RtgScreen *,UBYTE,UBYTE,UBYTE) FUNCTION Sets the foreground color, the background color and the drawing mode for Text on this RtgScreen. drmodes are defined as usual in graphics/rastport.i (or .h) : JAM1, JAM2, COMPLEMENT. INVERSVID is not valid... This function should only be used on Displays with depth <=8. INPUTS RtgScreen - an RtgScreen fgcolor - Foreground color bgcolor - Background color drwmode - Drawing mode, defined in graphics/rastport.i (or .h) NOTES Not yet implemented for rtgPICA.library SEE ALSO RtgOpenFont(),RtgSetFont(),RtgCloseFont(),RtgText(),RtgSetTextModeRGB() rtgmaster.library/RtgSetTextModeRGB rtgmaster.library/RtgSetTextModeRGB NAME RtgSetTextModeRGB - sets text color and drawing mode for depths >8 SYNOPSIS RtgSetTextModeRGB(RtgScreen,fgcolor,bgcolor,drmode) A0 D0 D1 D2 void RtgSetTextModeRGB(struct RtgScreen *,ULONG,ULONG,UBYTE) FUNCTION Sets the foreground color, the background color and the drawing mode for Text on this RtgScreen. drmodes are defined as usual in graphics/rastport.i (or .h) : JAM1, JAM2, COMPLEMENT. INVERSVID is not valid... Should only be used on Displays with depth >8. NOTES Due to a bug in CyberGraphX, this function does not work very well with rtgCGX.library (strange colors...). Not yet implemented in rtgPICA.library. INPUTS RtgScreen - an RtgScreen fgcolor - Foreground color bgcolor - Background color drwmode - Drawing mode, defined in graphics/rastport.i (or .h) SEE ALSO RtgOpenFont(),RtgSetFont(),RtgCloseFont(),RtgText(),RtgSetTextMode() rtgmaster.library/RtgText rtgmaster.library/RtgText NAME RtgText - displays Text on an RtgScreen SYNOPSIS RtgText(RtgScreen,buffer,string,length,xpos,ypos) A0 A1 A2 D0 D1 D2 void RtgText(struct RtgScreen *,void *,char *,WORD,SHORT,SHORT) FUNCTION Displays the string "string" with the chosen font parameters (see RtgSetFont(), RtgSetTextMode(), RtgSetTextModeRGB() ) at position xpos,ypos much the same way like Text() of graphics.library does. INPUTS RtgScreen - an RtgScreen buffer - The buffer address of the buffer where to display the text string - pointer to a string length - length of the string in characters xpos - the x-pos ypos - the y-pos NOTES Not yet implemented for rtgPICA.library. SEE ALSO RtgOpenFont(),RtgSetFont(),RtgCloseFont(),RtgCloseFont(),RtgSetTextModeRGB(),RtgSetTextMode() rtgmaster.library/RtgWaitTOF rtgmaster.library/RtgWaitTOF NAME RtgWaitTOF - Wait for the top of the next video frame. SYNOPSIS WaitTOF(RtgScreen) A0 WaitTOF(struct RtgScreen *) FUNCTION Wait for vertical blank to occur and all vertical blank interrupt routines to complete before returning to caller. Does not do anything at all with some sublibraries... (CyberGraphX does not support TOF-Waiting up to now...) INPUTS The Screen Handle of the GFX Board Screen (only in FACT needed for rtgEGS.library, and probably nothing much is done about it anyway... but be nice... give this parameter... to stay compatible :) ) RESULTS Places this task on the TOF wait queue. When the vertical blank interrupt comes around, the interrupt service routine will fire off signals to all the tasks doing WaitTOF. The highest priority task ready will get to run then. SEE ALSO graphics.library/WaitTOF() rtgmaster.library/RunServer rtgmaster.library/RunServer NAME RunServer -- Handle all the messaging for a server and several clients SYNOPSIS New_Socket = RunServer(SBase,Socket,in_buffer,out_buffer,maxplayers) D0 A0 A1 A2 A3 D0 struct RTG_Socket *RunServer(struct Library *,struct RTG_Socket *,struct RTG_Buff *,struct RTG_Buff *,int) FUNCTION You will have to run this fine function in a loop. Every time it returns, it gives you the Socket of a new connected client or 0, if no new Client connected. Also, in in_buffer, you will have all new messages sent from already connected Clients to the server, and all messages you filled in in out_buffer before calling this function, will be sent to the Clients. If nothing happened, this function returns at once, with consuming nearly no CPU time. You SHOULD initialize the in_buffer.num values with -1 EACH TIME, before RunServer is run, and the out_buffer.num values once before the FIRST TIME RunServer is called !!! NOTE: If you (later...) use RunServer, the Server can't handle a Player. You need ONE CLIENT PER PLAYER AND AN ADDITIONAL SERVER WITHOUT A PLAYER. The Server can run on a system, where a Client is also running, though (should be the fastest system in the connection, probably, as it will have to do all that messaging to the Client ...) NOTE: It might appear strange to you, that you have to open bsdsocket.library yourselves and provide it as parameter. This is needed because of some internal problems of AmiTCP, that make it IMPOSSIBLE opening it inside a library. Look at the Docs for more information. You do NOT have to use rtgmaster.library's Graphics Board features to use rtgmaster.library's TCP/IP features, if you do not WANT to... NOTE: It is NOT possible to give Socket->s (the Socket Number) of a Client to the Server using RtgRecv or RunServer !!! You will have to examine inbuffer->num[x] to find out which Socket was the Sender !!! Also len should NEVER be bigger than the actual message, or you might get a lot of strange results !!! Actually this function is now inside rtgextra.library. INPUTS SBase - Result of the call (C Syntax here...) SBase = OpenLibrary("bsdsocket.library",0); Socket - The Socket of THIS application (the Server...) in_buffer - messages that arrived during the call of RunServer out_buffer - messages that Run_Server should deliver maxplayers - The Maximum of Clients allowed (CAN'T BE BIGGER THAN 12 !!!) RESULTS New_Socket - The Socket of a newly connected Client. Save it somewhere... SEE ALSO OpenClient(),CloseClient(),CloseClient(),CloseServer(),RunServer(),RtgRecv(),RtgSend(),RtgAccept(),RtgIoctl(),GetUDPName(),RtgInAdr() rtgmaster.library/SwitchScreens rtgmaster.library/SwitchScreens NAME SwitchScreens -- Perform doublebuffering SYNOPSIS SwitchScreens(RtgScreen, Buffer) A0 D0 SwitchScreens(ULONG, ULONG) FUNCTION RtgScreen passed in A0 is a handle of a screen previously opened by OpenRtgScreen(). This functions is used to specify the buffer which should be displayed starting from the next Vertical Blank. The buffer supplied is a simple number (0 = first buffer, 1 = 2nd buffer etcetera). If the same buffer is being specified as is being displayed then this function should do nothing. This function will never be called from interupts. INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. Buffer - The buffer number the user wishes to display SEE ALSO OpenRtgScreen(),WaitRtgSwitch() rtgmaster.library/UnlockRtgScreen rtgmaster.library/UnlockRtgScreen NAME UnlockRtgScreen -- Unlocks a RtgScreen SYNOPSIS UnlockRtgScreen(RtgScreen) A0 UnlockRtgScreen(ULONG) FUNCTION Unlocks a previously locked RtgScreen. If this screen hasn't been locked before this function will do nothing. LockRtgScreen() and UnlockRtgScreen() functions nest, which means the user must call an UnlockRtgScreen() for every LockRtgScreen(). If not the user will end up with a permenantly locked screen. INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. SEE ALSO LockRtgScreen() rtgmaster.library/WaitRtgBlit rtgmaster.library/WaitRtgBlit NAME WaitRtgBlit - Waits on the Blitter to be finished SYNOPSIS WaitRtgBlit(RtgScreen) A0 WaitRtgBlit(struct RtgScreen *) FUNCTION Waits for the GFX Board Blitter to be finished. For those who wonder, why RtgScreen has to be given as parameter... it probably won't be used... just to be on the sure side :) Does not do anything at all with some sublibraries. Some of them ALWAYS wait... INPUTS RtgScreen - The RtgScreen structure SEE ALSO OpenRtgScreen(), RtgBlit() rtgmaster.library/WaitRtgSwitch rtgmaster.library/WaitRtgSwitch NAME WaitRtgSwitch - Waits on Doublebuffering having happened SYNOPSIS WaitRtgSwitch(RtgScreen) A0 WaitRtgSwitch(struct RtgScreen *) FUNCTION As SwitchScreens does not wait till the Doublebuffering has happened, but returns AT ONCE, it might be that the program wants to access the video memory BEFORE the change has happened. In this case you can use WaitRtgSwitch to be sure the change really happened. If you do not want to wait, simply do not use this call :) Does not do much for some sublibraries. Some always wait... INPUTS The Screenhandle of the Screen, where the Wait should happen... SEE ALSO SwitchScreens() rtgmaster.library/WriteRtgPixel rtgmaster.library/WriteRtgPixel NAME WriteRtgPixel - plots a single pixel to a RtgScreen SYNOPSIS WriteRtgPixel(RtgScreen, BufferAdr, XPos, YPos, Color) A0 A1 D0 D1 D2 WriteRtgPixel(struct RtgScreen *, APTR, ULONG, ULONG, UBYTE) FUNCTION Draws a single pixel at the specified position on a RtgScreen. The BufferAdr is the starting address of the buffer the users wants to draw the pixel in. The user has obtained this address using LockRtgScreen() and GetBufAdr(). The BufferAdr is needed to specify the correct buffer for screens which are double or triple buffered. This function should only work for Palette mapped modes, Color is the Color number of the palette. THIS FUNCTION IS IMPLEMENTED WITH SUBLIBRARIES STARTING WITH VERSION 1.8 DO NOT USE FOR SPEED RELEVANT STUFF. THIS FUNCTION MAY HAVE SOME OVERHEAD. FOR FAST OPERATIONS USE COPYRTGPIXELARRAY OR DO THE STUFF YOURSELVES. INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. BufferAdr - The address of the memory containing the actual screen graphics XPos - X position of the pixel the user wants to plot YPos - Y position of the pixel the user wants to plot Color - Color number SEE ALSO OpenRtgScreen(), WriteRtgPixelRGB(), WriteRtgPixelArray() rtgmaster.library/WriteRtgPixelArray rtgmaster.library/WriteRtgPixelArray NAME WriteRtgPixelArray - writes an array of pixels to a RtgScreen SYNOPSIS WriteRtgPixelArray(RtgScreen, BufferAdr, Array, Left, Top, Width, Height) A0 A1 A2 D0 D1 D2 D3 WriteRtgPixelArray(struct RtgScreen *, APTR, APTR, ULONG, ULONG, ULONG, ULONG) FUNCTION Draws an rectangular array of pixels to the specified position on a RtgScreen. The BufferAdr is the starting address of the buffer the user wants to draw this array of pixels in. The user has obtained this address using LockRtgScreen() and GetBufAdr(). The BufferAdr is needed to specify the correct buffer for screens which are double or triple buffered. This function should only work for Palette mapped modes. The array consists of one byte per pixel, each byte specifying a Color number. This function is many times faster than writing each pixel seperately to the screen using WriteRtgPixel(). Note: For compatibility with rtgAMI.library, Array should contain at least ((((width+15)>>4)<<4)*Height Bytes. THIS FUNCTION IS IMPLEMENTED WITH SUBLIBRARIES STARTING WITH VERSION 1.8 DO NOT USE FOR SPEED RELEVANT STUFF. THIS FUNCTION MAY HAVE SOME OVERHEAD. FOR FAST OPERATIONS USE COPYRTGPIXELARRAY OR DO THE STUFF YOURSELVES. INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. BufferAdr - The address of the memory containing the actual screen graphics Array - Pointer to an array of pixels which is Width pixels wide, and Height pixels high. Each pixel is one byte in size. Left - X position of the top-left of the rectangular pixel array Top - Y position of the top-left of the rectangular pixel array Width - Width of the array in pixels Height - Height of the array in pixels SEE ALSO OpenRtgScreen(), WriteRtgPixel(), WriteRtgPixelRGBArray() rtgmaster.library/WriteRtgPixelRGB rtgmaster.library/WriteRtgPixelRGB NAME WriteRtgPixelRGB - plots a single pixel to a RtgScreen SYNOPSIS WriteRtgPixelRGB(RtgScreen, BufferAdr, XPos, YPos, Color) A0 A1 D0 D1 D2 WriteRtgPixelRGB(struct RtgScreen *, APTR, ULONG, ULONG, ULONG) FUNCTION Draws a single pixel at the specified position on a RtgScreen. The BufferAdr is the starting address of the buffer the users wants to draw the pixel in. The user has obtained this address using LockRtgScreen() and GetBufAdr(). The BufferAdr is needed to specify the correct buffer for screens which are double or triple buffered. This function should only work for True Color modes, Color is a 32 bit value which specifies what Color the pixel should be. The layout of this 32-bit value is as follows: %aaaaaaaa.rrrrrrrr.gggggggg.bbbbbbbb a = AlphaChannel (8-bits) which may or may not be ignored. The user will set this to zero if the user doesn't want to use AlphaChannel. r = Red component (8-bits) of the 24-bit RGB value g = Green component (8-bits) of the 24-bit RGB value b = Blue component (8-bits) of the 24-bit RGB value THIS FUNCTION IS IMPLEMENTED WITH SUBLIBRARIES STARTING WITH VERSION 1.8 DO NOT USE FOR SPEED RELEVANT STUFF. THIS FUNCTION MAY HAVE SOME OVERHEAD. FOR FAST OPERATIONS USE COPYRTGPIXELARRAY OR DO THE STUFF YOURSELVES. INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. BufferAdr - The address of the memory containing the actual screen graphics XPos - X position of the pixel the user wants to plot YPos - Y position of the pixel the user wants to plot Color - A 32-bit value describing the color (see above) SEE ALSO OpenRtgScreen(), WriteRtgPixel(), WriteRtgPixelRGBArray() rtgmaster.library/WriteRtgPixelRGBArray rtgmaster.library/WriteRtgPixelRGBArray NAME WriteRtgPixelRGBArray - writes an array of pixels to a RtgScreen SYNOPSIS WriteRtgPixelRGBArray(RtgScreen, BufferAdr, Array, Left, Top, Width, Height) A0 A1 A2 D0 D1 D2 D3 WriteRtgPixelRGBArray(struct RtgScreen *, APTR, APTR, ULONG, ULONG, ULONG, ULONG) FUNCTION Draws an rectangular array of pixels to the specified position on a RtgScreen. The BufferAdr is the starting address of the buffer the user wants to draw this array of pixels in. The user has obtained this address using LockRtgScreen() and GetBufAdr(). The BufferAdr is needed to specify the correct buffer for screens which are double or triple buffered. This function should only work for True Color modes. The array consists of one longword (32-bits) per pixel, each longword specifies a Color in this format: %aaaaaaaa.rrrrrrrr.gggggggg.bbbbbbbb a = AlphaChannel (8-bits) which may or may not be ignored. The user will set this to zero if the user doesn't want to use AlphaChannel. r = Red component (8-bits) of the 24-bit RGB value g = Green component (8-bits) of the 24-bit RGB value b = Blue component (8-bits) of the 24-bit RGB value This function is many times faster than writing each pixel seperately to the screen using WriteRtgPixelRGB(). THIS FUNCTION IS IMPLEMENTED WITH SUBLIBRARIES STARTING WITH VERSION 1.8 DO NOT USE FOR SPEED RELEVANT STUFF. THIS FUNCTION MAY HAVE SOME OVERHEAD. FOR FAST OPERATIONS USE COPYRTGPIXELARRAY OR DO THE STUFF YOURSELVES. INPUTS RtgScreen - A handle for a valid screen previously opened by this sublibrary's OpenRtgScreen() function. BufferAdr - The address of the memory containing the actual screen graphics Array - Pointer to an array of pixels which is Width pixels wide, and Height pixels high. Each pixel is one longword (32-bits) in size. Left - X position of the top-left of the rectangular pixel array Top - Y position of the top-left of the rectangular pixel array Width - Width of the array in pixels Height - Height of the array in pixels SEE ALSO OpenRtgScreen(), WriteRtgPixelRGB(), WriteRtgPixelArray()